CANON SKIBOARDS

As Pioneers, and after seven years of setting the pace, Canon knows what works well. With a new thicker poplar wood core, vertically laminated tip-to-tail with two maple stringers, creating a solid platform for smooth high-speed stability. Sublimated, durable top sheet material to keep your boards cherry. Canon Skiboards have a 360 degree heavy-duty, stainless steel edge for those early and late season rock days. Elastomer foil vibration dampening system, layered for an ultra smooth ride. A variable radius sidecut combined with parallel lines surrounding the fore and aft base/snow contact points, create superb straight-line tracking and unparalleled carving. Twin-tip symmetrical design allows for stomping switch landings, and cruising fakie. Asymmetrically laid fiberglass creates a progressive flex pattern. Triax race glass is the most torsionally stiff glass used for razor-edge carving performance.

Models


The Heritage is the direct result of six years of research and development. The Heritage was designed by Canonšs pro riders specifically for riding the terrain parks and carving up the steeps. It is the most controllable board in its class. The flex pattern has been asymmetrically designed for optimum performance in all conditions. Whether ripping through the trees or landing switch stance off a 50-foot table, The Heratige is unparallel in versatility and control.

$259.00(w/bindings)
$169.00(w/out bindings)

The Heritage Specs
Ski Length
90cm
Contact Length
70cm
Tip Width
130mm
Waist Width
110mm
Tail Width
130mm
Top Sheet Material
Sublimated
Base Material
Extruded 1.2mm
Base Inserts
Stainless Steel
Radius sidecut
5.92m

 



The M-7 is alone in its class. These boards have set precedence as being the best handling high-speed boards on the market. With the surface area of a pair 165cm skis and a revolutionary shape, these boards have what all others lack: ultra stability at any speed on any pitch. They are compact enough for stomping switch (fakie) landings, with enough float to pull a clean waist-deep powder landing. To sum it up: the M-7 is the fastest all mountain skiboard available.

$279.00(w/bindings)
$189.00(w/bindings)

M7 Specs
Ski Length
99cm
Contact Length
78cm
Tip Width
124mm
Waist Width
106mm
Tail Width
124mm
Top Sheet Material
Sublimated
Base Material
Extruded 1.2mm
Base Inserts
Stainless Steel
Radius Sidecut
8.0m



BINDINGS
The evolution of your riding is dependent upon the interaction between your boards and boots. To fully utilize the progressive flex patterns of tomorrow's skiboards, your bindings must allow the entire length of the core to flex. Canon Skiboard bindings are compatible with all ski boots and hard-shell snowboard boots, and adjust from men's sizes 4 to 13 in seconds.

$99.00

TD-1 The all new Canon TD-1 binding system features heavy-duty 6061 aluminum sitting atop a juicy 1/2 inch, 80-durometer polyurethane cushion. This binding provides high performance shock absorption and high speed stability. Looking for a smooth ride? So were we. Insert Pattern Conventional 4x4 insert pattern universal with all Canon bindings and most other skiboard bindings. Sizes: One size fits all. Easily adjusts from size 4 to 13


CLOTHING

Wear the gear that represents the ride


$24.00

Flex Fit Cap - Blue, Black and Grey Small and Large


$25.00

Long Sleeve T-Shirt - Blue, black and Red. M, L and XL - 100% pre-shrunk cotton


$45.00
Hoodies - Blue, Black and Red. M, L and XL -

95% pre-shrunk cotton 5% polyester.


$19.00

Short Sleeve T-Shirt - Blue, Black and Red. M, L and XL -100% pre-shrunk cotton


$19.00

Beenie - Black, White and Red - One size fits all.